Contrive Burner Controller

IAPL Offers Contrive make Burner Controllers that handle ignition automatically and safely, flame monitoring, and fuel cutoff for Proportionally controlled oil or gas burners.


Features:

  • Flexibility to change the Sequence timings makes these Burner Controllers OEM friendly and helpful feature during commissioning.
  • Inbuilt LED Bar Graph for Flame Strength Indication.
  • 7 Segment LED Indicator for Sequence Status and Fault Indication.
  • Inbuilt Self Check features Lockouts in Case or any Internal Hardware or Software Failure.
  • Device Safety feature for Burner Controller does not start sequence or Lockouts if any of the Connected Valve or Ignition Device is not detected or Open Circuited.
  • Same Burner Controller can be used with Flame Rod, Unirod or UV Sensor Input at any time without any Hardware or software changes.
  • Robust Aluminum Enclosure for Safe Field Mounting Near to Burner. Also eliminates the need for separate Panel to Hose the Burner Controllers.
  • Plastic Body Version P'recommended for Installation for Panel Fascia Mounting and Atmospheres favorable for Plastic, Like a Air Conditioned Control Room.
  • TRIO, QBK Mini, QBK Basic and QBK full Models offer a variety of Input & Output Configurations to suit a wide need of applications.
  • Option to communicate with MODBUS and PROFIBUS systems.
  • UV4Sh are Compact High Sensitivity Ultra Violet UV Sensors to be used with QUAD, QUAD 400 and QUAD 600 Burner Controllers.
  • Narrow UV Spectrum makes Sensor insensitive to Sunlight, Infrared Rays Hot Work pieces and incandescent Furnace Walls.
  • Over Voltage and Short Circuit protected.
  • Bakelite Enclosure provides extended operating range and Thermal insulation upto 125°C.
  • With DIN43650 - ISO4400 socket electrical connector provide IP65 Enclosure.
  • Enclosure provided with V4 inch. Plug for Optional Cooling Air.


 Product Conformance:

  • Gas Equipment Directive (90/396/EEC)
  • Low Voltage Equipment Directive (73/23/EEC)
  • Machinery Directive (89/392/EEC)
  • EMC Directive (89/336/EEC)
  • EN298 Compliant
  • EN230 Compliant
  • EN746-2 CompliantBM0346



Share by: